A sticker’s finish changes how its colours look, how it reflects light and how it feels in someone’s hand. The right choice depends on where you plan to use it and what you want people to notice.

For a bright, high-impact design, glossy film may be a good fit. For photos, labels or QR codes that need to be easy to see under strong lighting, matte film is worth considering. For merch and gifts, holographic glitter laminate adds a more decorative look.

StickerPlanet.ca offers No Lamination, Glossy Film, Matte Film, Glossy UV Film and Holographic Glitter Lamination on its custom Promo Stickers Kiss/Die-Cut page. Here’s how to choose among them.

A stack of custom round stickers with a colourful coffee-cup design

Sticker finish comparison

Finish Appearance and colour Glare and fingerprints Good choice for
No Lamination Leaves the printed surface without an added laminate film No extra glossy reflection from a laminate Simple designs and projects where you don’t need an added film finish
Glossy Film Shiny surface that can make colours look bold and vibrant More reflective; fingerprints may be easier to notice, depending on the design and handling Logo stickers, colourful artwork, packaging and promotional giveaways
Matte Film Smooth, low-sheen appearance that can soften colour contrast Reduces reflections; fingerprints are often less noticeable than on a glossy surface Product photos, glare-heavy retail lighting, labels and QR codes
Glossy UV Film Glossy appearance, with a UV film option Reflective like other glossy finishes; specific protection ratings are not listed on the product page Designs where you want a glossy finish and are selecting the UV film option
Holographic Glitter Lamination Adds a sparkling, light-catching effect Reflections and glitter can compete with small details Merch, gifts and decorative stickers designed to stand out

A note on scratch resistance: Lamination adds a film layer over the printed surface, but StickerPlanet.ca does not list comparative scratch-resistance ratings for these options. If scratch performance is critical for your application, confirm the appropriate choice before ordering.

Choose glossy when you want colour to pop

Glossy film gives a sticker a reflective sheen. That shine can make rich colours and high-contrast artwork feel especially vivid, which is why it’s a popular option for logo stickers, promotional items and packaging.

It can work well when:

  • You want a polished, high-shine appearance.
  • Your artwork uses bold colours, strong outlines or large graphic elements.
  • The sticker will be seen in ordinary indoor lighting or handled occasionally.

The trade-off is reflection. Under bright retail lights or direct sunlight, glare can make parts of the design harder to see from certain angles. Fingerprints and smudges may also show more readily on a glossy surface, particularly on dark areas.

Sample photo in words: Picture a round coffee-shop logo with a deep background and bright lettering. Glossy film gives the design a clear shine and helps its colours catch the eye.

Choose matte when readability matters

Matte film has less sheen than glossy film, so it reflects less light. That can make a design easier to view in a brightly lit shop, photograph without distracting reflections or read at a glance.

Consider matte for:

  • Product photos: A lower-reflection surface can help keep bright spots from obscuring the sticker in pictures.
  • Retail displays: Matte can be more comfortable to view under strong overhead lighting.
  • QR codes and scanned labels: Reducing glare may help make a code easier to scan, but always test your finished design with the phones and lighting your audience is likely to use.
  • Designs with lots of small text: A calm, low-sheen surface keeps attention on the printed information.

Matte may soften the appearance of colours compared with a glossy finish. That isn’t necessarily a drawback: for restrained branding, subtle artwork or text-heavy designs, a less reflective look may be exactly right.

For QR codes, leave clear space around the code and preserve strong contrast between the code and its background. Avoid placing fine details or reflective effects behind the code. Test a printed sample before ordering a large run if reliable scanning is important.

When does glossy UV film make sense?

Glossy UV Film is a separate selection on the product page. It offers a glossy look, and its name identifies it as a UV film option. The page does not provide a specific UV rating or comparative scratch-resistance figure, so avoid assuming a particular service life or level of protection.

If the sticker will be exposed to demanding conditions, consider where it will be applied, how it will be handled and what kind of exposure it will face. If you need a specific performance level, check with StickerPlanet.ca before placing your order.

A group of holographic stickers showing rainbow-like reflections across several designs

Choose holographic glitter laminate for a decorative effect

Holographic Glitter Lamination is the most attention-grabbing of the listed finishes. It adds sparkle and shifts in appearance as the viewing angle and light change. That can give a sticker a special-edition feel that suits gifts, creator merch, collectible designs and promotional items meant to stand out.

It’s a strong choice when the visual effect is part of the design. It may be less suitable when the sticker needs to prioritize fine detail or straightforward reading. The glitter effect can compete with small text, and reflections may make a QR code harder to scan. If the design includes a code, keep it in a simple, high-contrast area and test it before committing to a large quantity.

Sample photo in words: Imagine a guitar-shaped merch sticker with a colourful illustration. The holographic effect adds flashes of colour as someone tilts it, making it feel more like a keepsake than a basic label.

When is no lamination enough?

No Lamination is an option when you want the printed design without an added laminate film. It can be a straightforward choice for a simple project or a design where an extra surface effect isn’t needed.

The product page describes the stickers as waterproof and fade-resistant. However, it does not provide a comparative durability rating for the laminate options. If your priority is a specific level of protection, ask about the best option for your intended use rather than relying on the finish name alone.

Choose the sticker material and cut, too

Finish is only one part of the decision. The Promo Stickers Kiss/Die-Cut page lets you choose custom sizes from 1" × 1" up to 6" × 6", in Die-Cut or Kiss-Cut formats. Die-cut stickers are cut to the design’s outline. Kiss-cut stickers are cut through the sticker layer while leaving the backing intact.

Material options include Removable / Low Tack Vinyl, Repositionable Vinyl, Permanent Vinyl, High Tack Vinyl, Static Cling, Silicone Back PET Film, Holographic Vinyl and Reflective Vinyl. The available vinyl colours are White and Clear. The product is printed in full colour, with quantities from 5 to 10,000.

Think about the surface and use before choosing:

  • A laptop, phone case or water bottle may call for a finish that suits frequent handling and your preferred look.
  • A QR code or small label benefits from a clean design area with strong contrast.
  • A promotional giveaway can use glossy colour or holographic sparkle to make the design more noticeable.
  • A gift or piece of creator merch may call for a distinctive shape and decorative finish.

For help preparing artwork, see the product page’s design guidelines.

Promotional pricing

The following advertised prices include free Canadian shipping:

Sticker quantity and size Price
330 stickers, 1" × 1" $29
100 stickers, 2" × 2" $29
100 stickers, 3" × 3" $49
100 stickers, 4" × 4" $69
100 stickers, 5" × 5" $99
100 stickers, 6" × 6" $119

There are no hidden costs, and Canadian printing and shipping are handled in-house.

A quick way to decide

Choose glossy for shine and bold colour. Choose matte when you want less reflection and easy viewing. Choose glossy UV film if you want a glossy option identified as UV film, and confirm any specific performance requirements before ordering. Choose holographic glitter when sparkle is part of the appeal. Choose no lamination when you don’t need an added film finish.

Ready to compare sizes, materials, cuts and finishes? Visit the Promo Stickers Kiss/Die-Cut product page to build your custom sticker order.

author avatar
MMAdmin